Peak Pro Dominator
Size

DN15/15 to DN25/25

Centre Size

80mm

Pressure Rating

PN16

Temperature Rating

-10 to 100°C

End Connections

Flushing bypass body - BSP Parallel
Strainers & Tailpieces - BSP Taper

Please refer to Datasheet for full technical information

Features & Benefits

  • Compact, pre-fabricated unit – now available with Peak Pro PICV with a wide range of settable flows to suit all applications
  • All valves are subject to both a pressure test, in accordance with BS EN 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1. This provides reassurance of performance and accuracy within each valve
  • Provides accurate flow rates & differential pressure control as well as flow measurement (Z9801PF), system flushing and isolation
  • DZR H Body tested to 3.1X Design Working Pressure (DWP)and bronze H Body tested to 3.9 X DWP during development for design robustness and tested to EN12516-2 to comply with the Pressure Equipment Directive (PED)
  • Fully assembled & factory tested unit reduces installation time, costs and specification risks
  • Can be tailored to suit customer’s specification: available with extension stems (Z9801PEXT) or without (Z9801P), add an extra Flow Measurement device for verification of flow rates (Z9801PF & Z9801PFEXT), Available in 400kPa & 800kPa rated variants
  • On-Off, modulating or feedback actuators are available separately to match specification