Ball Valves
The Crane Fluid Systems range of WRAS approved ball valves consists of compact, lightweight units which are easy to install and operate, yet their ability to withstand robust construction ensures long, trouble-free service life.
They offer full flow with minimum turbulence in the open position and bubble tight closure in the closed position. Only a quarter-turn is required to fully open or close the valve.
Ball Valves Range
Total Products: 9
D171
1/4" to 2 1/2"
Ball Valve – Bronze
- 1/4" to 2 1/2"
- Taper Threaded To BS EN 10226-2 (Iso 7-1) Formerly BS 21
D171A
1/4" to 2"
Ball Valve – DZR Brass
- 1/4" to 2"
- Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21
D171AC
15mm to 28mm
Ball Valve – DZR Brass
- 15mm to 28mm
- Compression ends to suit BS EN 1057: Half hard R250 copper tube
D171ACEXS
15mm to 28mm
Extended Stem Ball Valve – DZR Brass
- 15mm to 28mm
- Compression ends to suit BS EN 1057: Half hard R250 copper tube
D171AEXS
1/4" to 2"
Extended Stem Ball Valve – DZR Brass
- 1/4" to 2"
- Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21
D171ALS
1/2" to 2"
Ball Valve with Lockshield – DZR Brass
- 1/2" to 2"
- Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21
D171ATH
1/2" to 2"
Ball Valve with T-Handle – DZR Brass
- 1/2" to 2"
- Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21
D171MHU
1/2" to 1"
Draw-Off Ball Valve – Bronze
- 1/2" to 1"
- Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21
D171MHULS
1/2" to 1"
Draw-Off Ball Valve with Lockshield – Bronze
- 1/2" to 1"
- Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21