Press-Fit valves now approved for use on Pegler XPress and SANHA -Therm Carbon Steel Pipe

5 March 2014

The Press-Fit range of valves from Crane Fluid Systems is now fully approved for use on Pegler XPress and SANHA-Therm carbon steel pipe, in addition to Geberit Mapress carbon steel for any chilled or heated system.

The Press-Fit range of valves from Crane Fluid Systems is now fully approved for use on Pegler XPress and SANHA-Therm carbon steel pipe, in addition to Geberit Mapress carbon steel for any chilled or heated system.

The new approval relates to the press-fit connection* between the Crane Fluid Systems valve and the XPress/ SANHA carbon steel pipe, these connections must be made using the correct Mapress approved Press-Fit tool.

Comprising a ball, balancing, strainer and check valve, the Crane Fluid Systems Press-Fit range have been proven to connect effortlessly, offering building services engineers a variety of time and cost-saving benefits, as well as excellent quality and reliability.

The Crane Fluid Systems Press-Fit valve range is also approved for use with copper pipe meeting BS EN1057 R220 soft copper (15-22mm), R250 semi-hard copper (15-28mm), R290 hard copper (15-54mm) as well as Geberit Mapress stainless steel pipe.

Key benefits of Crane Fluid System Press Fit system are -

  • Unique visual press indicator
  • Protection plug to prevent any ingress prior to installation
  • Defined leak paths – a failsafe against unpressed joints
  • Clean heat free joints
  • Valves rated up to 120°C at 16 bar

*Crane Fluid Systems will warrant this connection in accordance with its standard terms and conditions provided that the connection is made in accordance with the installation instructions and that the carbon steel pipe meets the following specification: Carbon steel to EN 10305-3:2010 (material name E195, material number 1.0034) with an external zinc coating of 7 to 15µm.

View the Press-Fit Range