Our genius is valves ®

Product Overview

DN40 & DN50
DN40: 0.39 - 3.00l/s
DN50: 0.69 - 3.80l/s
0°C to 90°C
BSP Female Taper to BS EN 10226-2

*Please refer to Datasheet for full technical information

  • Peak Pro

DN40 & DN50

Pressure Independent Control Valve (PICV)

  • Comprehensive flow range available, allowing for cost effective valve selections. The PICV Peak Pro has up to 25% higher max flow compared to the previous model
  • Accurate over a wide ΔP range – up to 800kPa
  • Class IV leakage
  • PN16 rated product, suitable for high pressure applications
  • Design validation testing to BSRIA BTS01. As per Cyclic Testing requirements, valve subjected to 10,000 cycles (equivalent to 15 years* of typical service)
  • Comprehensive testing undertaken for each valve – pressure tested to BS EN 12266-1
  • Integral test points for verification of P and valve performance
  • Built in convoluted integral diaphragm
  • Smaller and lighter design suits applications with a small footprint

*based on two full stroke cycles per day